• Quicktip preset vs hold Failsafe explained Spektrum/OrangeRX eg Naza failsafe

    Quick video showing the two different types of bind, some Spektrum receivers support both preset and hold failsafe. The servos are labelled T for Throttle, A for Aileron and E for Elevator - A and E show the failsafe handling for ALL other channels except throttle. Hold failsafe - throttle goes to bind position (idle), all other channels hold last position when signal lost. Preset failsafe - all channels go to bind position when signal lost. The two binding procedures are: Preset Failsafe (where supported) power receiver with bind plug inserted, then immediately remove bind plug before switching on Tx with bind pressed. Hold failsafe power receiver with bind plug inserted and leave bind plug in while switching on Tx with bind pressed. List of receivers shown in video and the failsafe...

    published: 13 Feb 2014
  • How to Install Lightroom 6 Presets on Mac and PC

    More than 600 Lightroom Presets and Brushes to choose from: https://sleeklens.com/product-category/lightroom-presets/ Get 10% Discount with the code: enjoy10 Coupon works on any lightroom bundle or workflow: Written installation guides for Lightroom Brushes and Presets: https://sleeklens.com/how-to-install-lightroom-presets/ https://sleeklens.com/how-to-install-lightroom-brushes/ How to Install Lightroom 6 Presets on Mac and PC We are going to be looking at how to install Lightroom presets on your PC or Mac. Presets can be bought and then downloaded online, downloaded for free on various online platforms and they can be created. We are not going to be looking at downloading or creating the presets as that is out of the scope of this tutorial. In this tutorial, I am assuming that you h...

    published: 22 Jun 2015
  • Strymon Timeline Part II Walk through

    $449.00 https://www.prymaxe.com Strymon Timeline Delay CALL TO ORDER 1-855-PRYMAXE (779-6293) When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs with an intense focus on dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed. Each algorithm is so detailed it requires the entire processor. TimeLine provides y...

    published: 29 Mar 2013
  • Making Insanely Difficult Selections Like Trees Using Alpha Channel in Photoshop

    Make crazy selections no matter how precise they are using channels in Photoshop. In this video, we'll learn how to replace skies by utilizing channels for mask information and select detailed objects like grass and trees or even hair very simply. This method of making selections is like the last resort. When nothing works, be it "Select and Mask" or "Select Color Range", channels are powerful sources of creating masks to make that selection. This can be done by creating an alpha channel which is additional channel besides RGB or CMYK to hold complex masking information. Along the way, while we replace skies, we'll also look into some tips and tricks on matching the skies with the image. ► SUBSCRIBE: https://goo.gl/iaROYY If you think you can help, entertain or even disturb someone by ...

    published: 20 Apr 2017
  • Where to Put Plugin Preset Files (Free Sytrus Preset)

    AudioCollege - Your #1 Source for Everything Audio http://www.youtube.com/AudioCollege Description: -Short video showing you how to get downloaded presets to appear in the plugins preset selection menu. This video will teach you where to copy and paste the preset you download online. Check below for a link to download a free Sytrus preset. Purpose of Video: -To quickly show viewers which folder to put their download preset files so they can use them in their own projects. Supplemental Material: -Dual FM Arp 002 (Sytrus) --http://adf.ly/KBqCA --MOD X = FM Amount --MOD Y = 2nd Arp Volume + HOLD Note Volume --Play a 4 note chord with this preset for best results. -AudioCollege's - FL Studio's Preset Library --http://adf.ly/JbWWJ ----- Tweet This Sample and Get Another Exclusive Free Down...

    published: 03 Mar 2013
  • Pro Tools Tutorial: Memory Locations & Zoom Presets

    Learn how to use compression: http://learncompression.com Learn to mix hip-hop: http://mixinghiphop.com Improve your ears: http://quiztones.com Mixing tips: http://theproaudiofiles.com How to configure your Pro Tools recording sessions in to make it easier to jump around from one section to another. Also, how to focus on individual instruments or groups of instruments if you're going to be doing some editing. --- Transcript: I'm gonna demonstrate some tricks that you can use to configure your recording sessions inside of Pro Tools to make it easier to do things like jump around from one section of your song to another section of your song. Or do things like focus on individual instruments or groups of instruments if you know that you're going to be doing a lot of editing of them. Now ...

    published: 06 Dec 2013
  • How to Use REFINE EDGE in Adobe Photoshop! Improve Your Selections

    Today's tutorial looks at the Refine Edge feature in Photoshop, and how it can drastically improve your selections that contain hair and/or fur. Support my content: http://www.patreon.com/howardpinsky Tools used in this tutorial: Color Range: If you're looking to select all or most of a single color in your image, Color Range will help you do that. It lets you automatically target pure colors, or sample specific colors using the eye dropper. To add to your sample, hold down shift. To subtract, hold down Alt (Windows) or Option (Mac). Pressing OK will create the selection. Refine Edge: When you initially create a selection, it's likely to be very sharp around the edges, and likely won't contain hair or fur. Refine Edge will allow you to not only soften out those edges, but you'll be abl...

    published: 12 Aug 2013
  • How To: Program a Radio Station in your 2015 Toyota

    This is how you program a radio station in your new 2015 Toyota: On your Toyota dashboard screen, select "AM" or "FM". Using your tuning dial, tune to the station you would like to save. Press and hold the number on the touch screen that you would like to save this station under. This can be done in any order. When you hear the beep, the station has been saved. If you would like to save additional stations, repeat this above steps. To save stations from another source such as, Satellite or XM, select "Source". Select the source you would like. (Satellite, XM, FM or AM). Repeat the steps above. Balise Toyota Scion of Warwick 1400 Post Road Warwick, RI 02888 Sales (401) 352-5911 Service: (401) 781-4377 Parts: (401) 781-5209 http://www.balisetoyotaofwarwick.com/index.htm

    published: 29 Jul 2015
  • Learn Adobe Photoshop - Brush Presets

    SALE TODAY: Learn Piano on iOS http://bit.ly/PianoAppSale In this video, Mahalo expert Gene Shaw describes the Brush Presets Panel and explains how it's used create new brushes. Brush Presets --------------------------------------------------------------------- If you have certain brushes that you like to use, whether they're custom brushes that you've created or belong to the set of defaults within Photoshop, you can save groups of them in the Brush Presets Panel for rapid access. Photoshop attempts to simulate many types of illustration and pairing tools. Adobe starts you off with options that can be accessed in the Brush Presets Panel. 1. Open the Brush Presets Panel by clicking Window -- Brush Presets in the top menu bar and making sure it's checked.2. On the left side in the panel ...

    published: 27 Feb 2011
  • How to use the 2013 VW Premium VIII Radio

    How to connect your MP3 player to your Premium VIII Radio. ------------------------------------------------------- Connecting your MP3 player (You have to have an auxiliary or optional MDI cable) 1. Press SETUP hard key. 2. Press MEDIA soft key. 3. Check ACTIVATE AUX INPUT. 4. Press MENU hard key. Streaming audio over Bluetooth 1. Pair your phone. 2. Play music. 3. Press MEDIA hard key. 4. Touch BT-AUDIO soft key. Using the CD player 1. Press the LOAD/EJECT button. 2. Press any of the 6 soft keys and load CD. 3. Press the MEDIA hard key. 4. Touch CD soft key. Preset radio stations (Up to 24 preset channels may be stored) 1. Press TUNE soft key 2. Use knob to select a station 3. Press & hold any of the 6 preset soft keys Have other questions? Visit http://www.vw.com/2013 Instructi...

    published: 25 Mar 2013
  • Build Your Own Tap Tempo and Preset Selector for Nova Delay

    In my last video I modified a TC Electronic Nova Delay to have External Tap Tempo and Preset Selector capabilities. This video shows you how to construct your own tap tempo pedal to take advantage of this. This pedal works with the Nova delay and Boss units. It may well work for other delay units, I haven't tried them. All parts for this pedal were ordered from http://www.pedalpartsaustralia.com/ and came to a total of around $15. Should you choose to only have tap tempo or preset selection, then you only require 1 switch and Tip/Sleeve or mono jacks, not Tip/Ring/Sleeve stereo jacks for the output. The video for the Nova Delay modification can be found here: https://www.youtube.com/watch?v=dh-_wn2VkF0 FYI, some people (myself included) noticed that Boss and TC units didn't sync up a...

    published: 25 Jan 2013
  • Allen & Heath Qu Series - Getting Started

    QU Getting Started: This video will give you an overview of the Qu layout and operation. Qu-16 has 16 identical fader strips in one bank. Qu-24 has 24. These provide access to the input and master channel levels and processing. There are three Layers. Press the lower key to access the Mono channels, the upper key to access the stereo channels, FX returns, FX send and Mix masters. Press both keys together to access the Custom Layer. The faders are motorised and instantly move to show the current settings. The Mute key turns off the channel audio signal, including the send to all mixes and effects. Press the Select key to access the channel processing. Pan and other parameters can be adjusted using either the SuperStrip controls or the full colour touchscreen with dedicated Screen keys. ...

    published: 12 Mar 2014
  • Omnisphere 2: Best Synth Presets? - Making a beat + In Depth Review (Cop or Drop?)

    ENTER MY SERUM VST GIVEAWAY ($189 Value Synth) - http://seribeats.com --- Overall Omnisphere 2 is dope but definitely not something I would use consistently other than for the presets. Even after I got used to the interface it didn't feel intuitive for sound design. Here's what I liked and didn't like about it... Liked: 1. Huge library and huge selection of presets and packs. 2. Packed with synth features and rhythmic/arp options to make complex sounds. You will never run out of Oscillators :) 3. Has high quality effects and Oscillators. Didn't Like: 1. Not intuitive for doing quick or simple sounds. 2. CPU use increases significantly when you start pushing it. 3. VERY LITTLE Visual feedback. Bad for precise design. Final Opinion - 2:56 808 Essentials Kit - http://bit.ly/2neSelC --...

    published: 28 Jul 2017
  • How to Sharpen Photos Cleanly Without Affecting Edges in Photoshop

    In this photoshop photo editing tutorial, learn how to sharpen your photos cleanly in photoshop without affecting edges and that black and white edging won’t be a problem anymore while sharpening. ►Download PSD file: http://photoshopdesire.com/sharpen-photos-cleanly-without-affecting-edges-photoshop/ 1 00:00:14 Quick Photoshop Tip: A Cleaner Way to Sharpen Your Photos in Photoshop. 2 00:00:24 Duplicate your background layer. 3 00:00:36 Select your whole image (CTRL+A or Command+A). 4 00:00:45 copy it (CTRL+C or Command+C). 5 00:00:56 create a new Alpha channel in the Channels tab. 6 00:01:05 Paste your selection onto that “Alpha 1” Channel (CTRL+V or Command+V). 7 00:01:17 Go to Filter - Stylize - Find Edges. 8 00:01:25 [If needed] Add some contrast between the edges and white part...

    published: 30 Aug 2017
  • How to Change Hair Color with Curves in Photoshop - Quick Coloring Tips & Tricks

    In this photoshop manipulation tutorial, learn How to change hair color or dye hair easily using curves in photoshop. ►Download PSD file: http://photoshopdesire.com/change-hair-color-curves-photoshop-quick-easy/ ►Download Photo: https://www.flickr.com/photos/psdesire/37830895431 First of all, Add new curves adjustment to colorize hair. I want to convert her hair to "RED HEAD". So select red curve and drag upward to apply red tones. Now select the skin tones and exclude color from skin. To do that, go to select menu - choose color range. Now select "SKIN TONES" option from drop down list. Hold ALT or OPTION key and click on layer mask to view it. We want to add color to hair not skin, so go to adjustments and select "INVERT" CTRL + I. Take soft brush and paint with black to remove e...

    published: 21 Oct 2017
  • How to Name and Save Presets - Strymon TimeLine & Mobius

    Our main channel: http://youtube.com/strymon More tutorial videos: http://youtube.com/strymonsupport In this video we'll show you how to name and save presets on your TimeLine and Mobius.

    published: 01 Apr 2013
  • TEKKEN 7 - Controller Setup In Character Select Screen

    Controller Setup in Character Select Screen @ TEKKEN 7 (PS4) https://www.tekkenzone.net

    published: 01 Jun 2017
  • How to Install Lightroom 6 Presets on Mac and PC + Download 2600+ Presets Lightroom

    How to Install Lightroom 6 Presets on Mac and PC Bonus Free Download more than 2600+ premium lightroom preset here : https://goo.gl/AFX7OJ (2 mb. Google Drive) *sorry, some presets error, so make it not responding. :) We are going to be looking at how to install Lightroom presets on your PC or Mac. Presets can be bought and then downloaded online, downloaded for free on various online platforms and they can be created. We are not going to be looking at downloading or creating the presets as that is out of the scope of this tutorial. In this tutorial, I am assuming that you have Lightroom installed, have a program that can unzip compressed files, you have downloaded a zip file with the presets or have preset files available on your computer and that you know how to navigate the folder st...

    published: 09 Nov 2015
  • Simple Retouching Trick For Amazing Portraits - Make Skin Look Smooth and Bright in Photoshop

    In this photoshop retouching tutorial, i'm going to show you how to make skin look smooth and bright using Adobe Photoshop. Some retouching methods require a lot more care and attention. while other techniques are very quick and easy. Here, i’ll give you one of those simple skin-retouching trick, that will help you create amazing portraits in no time. ►Download PSD file: http://photoshopdesire.com/simple-skin-retouching-trick-amazing-portraits-photoshop/ ►Download Photo to practice: https://www.flickr.com/photos/psdesire/37896996574 Duplicate background layer ‘CTRL+J’ (on WIndows) or ‘CMD+J’ (on a Mac). Rename the layer to "Skin Smoothing". Right-click on the layer and click ‘Convert to Smart Object’. Now go to image menu - adjustments - select invert CTRL + I keyboard shortcut. Then ...

    published: 24 Nov 2017
  • Excel 2013 Tutorial For Noobs Part 23: How to Select a Range of Cells & Cells in Multiple Worksheets

    http://www.excelfornoobs.com In this Microsoft Excel tutorial for beginners I show you how to select an entire column, an entire row and how to select a range of cells in a single sheet or how to edit cells in multiple worksheets at the same time. This Excel tutorial works for Microsoft Excel 2007, Excel 2010 and Excel 2013. There are multiple ways to select cells, a range of cells or multiple ranges of cells in Excel. Sometimes you might even need to know how to select multiple noncontiguous ranges in multiple worksheets to make one single change. This would be much more efficient than making the same change cell by cell. If you are this far along then I assume you are already familiar with how to select cells so I will only cover additional cell selecting techniques that you might hav...

    published: 07 Feb 2013
  • Why EVERY photographer should be using LIGHTROOM!

    NEW! Lightroom PRESET PACK: https://sellfy.com/p/QjNY/ - Edit your photos with 15 brand new presets! Colour grade your footage & photos! : https://sellfy.com/p/EaHg/ Get a website! https://www.squarespace.com/mckinnon - save 10%! - ALL of the Music I use: https://goo.gl/IMZC9A - AMAZING for YouTubers. Sign up! What's up guys! Today we are diving in to LIGHTROOM! Lightroom is massive. I tried to make this quick but, there is SO much to go over and Sao many incredible tips and tricks to really take your photos to the next level. Hope you enjoy! THE GEAR I USE: My Super Awesome Tactical Camera Bag : http://amzn.to/2m8jnaT My MAIN Camera - http://amzn.to/2kdu35o My Second Backup Camera - http://amzn.to/2r29gGg My FAVOURITE Lens Ever - http://amzn.to/2kQNK4U The Lens I am currently using...

    published: 18 Jun 2017
  • Canon 5D Mark IV Tips & Tricks - Custom Button Setup (Fixed Audio)

    ➨ My Recommended Gear: https://kit.com/photorectoby 🌠 For 10% off your first purchase, go to http://www.squarespace.com/photorectv 🔥 Join an awesome community and learn photography - https://photoenthusiastnetwork.com/ Win $6,000 worth of Photo Gear and Workshop http://photorec.tv/giveaway A new feature of the Canon 5D Mark IV provides excellent customization for AF and general efficient use of this professional camera. I show you how to switch from ONE SHOT to AI SERVO, back button focus and a few more Canon 5D Mark IV Tips and Tricks for customizing. Follow me on instagram for more 5D Mark IV from Scotland: http://instagram.com/photorectoby/ More about the Canon 5D Mark IV: http://photorec.tv/5DM4 Buy the Canon 5D Mark IV: http://bhpho.to/2cAimXL Try the Canon 5D Mark IV yoursel...

    published: 01 Oct 2016
  • How to Cutout Hair Without Fringing in Photoshop - Hair Masking Easy & Fast !!!

    Download Stock Image & PSD file: http://photoshopdesire.com/cutout-hair-without-fringing-photoshop/ In this photoshop tutorial shows you how to cutout or mask hair in Photoshop. Cutting hair without fringing (light or white part around the edges of the hair) is tough job, but i will show you tip to achieve perfect hair selection and masking. 00:14 How to cutout tricky hair perfectly without fringing in photoshop 00:23 First take any selection tool and select the background 01:20 go to select and inverse the selection 01:33 click on select and mask feature 01:52 Take refine edge tool and paint on edges of the hair 02:03 check smart radius, Photoshop looks more closely along the edge of the initial selection especially hair and shoulder selection 02:12 Now just paint on edges 02:45 ...

    published: 05 May 2017
  • Photoshop Quick Tip: Cut Out Subject from Background in 3 Easy Steps - Refine Hair masking Tutorial

    In this photoshop photo editing tutorial, learn how to use refine edge tool to cut out subject with lot of hair in just 3 easy steps. ►Download PSD file: http://photoshopdesire.com/photoshop-quick-tip-cut-subject-background-3-easy-steps/ 1 00:00:13 How to Cutout subject from background in photoshop. 2 00:00:21 Grab the Quick Selection Tool and select the model. 3 00:00:49 Now refine the selection using refine edge tool. for CC 2017 version Hold shift and click on select and mask. 4 00:00:58 And you will see the Refine Edge window. 5 00:01:05 Now we will want to have a look at our mask radius, so tick this "Show Radius" checkbox. 6 00:01:16 if you increase the "Radius" value sightly, you will see a outline appearing - that's the edge of our mask. 7 00:01:25 Rest of the mask look fine...

    published: 29 Sep 2017
  • Akai MPK Mini MK2 and FL Studio 12 - PADS + Transport Setup

    I'll show you how to setup the MPK mini Mk2, using a preset file. With this file you can use the FPC and also control the Transport with the Pads on CC mode (Play / Pause / Rec / etc) 1-Download and save the following file: http://www.mediafire.com/download/5h52k5y8a9ed7dz/mpc_oxygen25.mk2 2- Load the file in one of the MPK's programs, using the MPK Mini MK2 editor. If you don't have it, you can get it here: http://www.akaipro.com/product/mpk-mini-mkii#downloads 3- On FL Studio, Midi Settings, select the the MPK Mini MK2 and on the "Controller type" drop down menu select "M-audio Oxygen 25" 4- In the MPK select the Program with the preset file (Hold 'Prog Select' and hit the corresponding pad) Enjoy. The preset was created by me, please feel free to share or modify it. If you have an...

    published: 02 Feb 2016
  • How To Find Ford Radio Code Serial From The Radio's Display - Sony/Visteon

    https://www.onlineradiocodes.co.uk/ford-radio-codes Online Radio CodesThe U.K's No.1 Radio Code Company, Order Online 24/7 or By Phone 01942 604333 Mon-Fri 9am - 5:30pm, With Over 25,000 Customers Served Unlock Your Radio Today. Suitable for: Ford Fiesta Ford Focus Ford Ka Ford Fusion Ford Galaxy Ford Kuga Ford Mondeo Ford C-Max Ford S-Max Ford Tourneo Ford Transit Ford Sony Visteon Ford V Codes Ford Radio Codes All models covered. v codes only £9.99 Delivered in minutes. How To find Your Ford Radio Code Serial Number: Holding Preset Buttons 1 & 6 Turn on your radio and hold the preset buttons 1 & 6 for 2 to 3 seconds, the code cycle will begin, wait until your serial shows and make note. Holding Preset Buttons 2 & 6 If buttons 1 & 6 do not work, try holding button presets 2 & 6. Th...

    published: 14 Jul 2016
  • How to Reset, Decode or Unlock SAFE MODE for AUDI SYMPHONY 2 or II RADIO (Quick Fix Steps in Desc.)!

    STEPS (ALSO IN ANNOTATIONS): 1. You need your radio manual and look for the radio card with your vin# and the four digit number underneath. 2. While the display says "SAFE" press and hold RDS and AS. 3. A roman numeral will appear on the left side of the display with a four digit number on the right (roman numerals I, II and III indicate the number of attempts, III is the LAST attempt. 4. Use the preset selection buttons to cycle through the digits. 5. After your four digit code matches what is on your radio card, press and hold RDS and AS. 6. Enjoy your freshly restored Audi Symphony II and the $80 you didn't spend at the dealer! (if your attempts are wasted, try this by another youtuber: https://www.youtube.com/watch?v=X8h9o6N68es&t=0s) If it is any consolation, this was performed on...

    published: 28 Dec 2016
  • Alexander Pedals Oblivion Vintage Delay

    http://www.alexanderpedals.com/ Welcome back to ProGuitarShop and ToneReport.com. Today we're heading into the Oblivion Vintage Delay from Alexander Pedals. Alexander has escalated from Amnesia to full-on Oblivion, radically enhancing the Amnesia's feature set for a premium analog-modeling experience. Typically, feature-rich delay pedals require a significant time investment with time spent cycling through menus and banks, but the Oblivion sounds great right out of the box at any setting. The oblivion's expression control is a breeze, while remaining extremely powerful. Any of the unit's five knobs can be controlled simultaneously with just one expression pedal, allowing for advanced delay control unlike anything on the market. The Oblivion's four modes cover the full range of classic anal...

    published: 14 Apr 2016
  • Roland VT 3 Issue

    Anyone have any experience with this? Its like the Roland VT-3 'forgets' its positions/presets. Effect Wet/Dry has no effect and this happens intermittently when I move any control but this example is the Reverb control. When I turn off Reverb, preset 3 'forgets' and acts like it is Bypassed. Selecting preset 3 again takes a number of presses for it to 'catch' and hold. Baffled!

    published: 15 Jul 2017
developed with YouTube
Quicktip preset vs hold Failsafe explained Spektrum/OrangeRX eg Naza failsafe

Quicktip preset vs hold Failsafe explained Spektrum/OrangeRX eg Naza failsafe

  • Order:
  • Duration: 6:49
  • Updated: 13 Feb 2014
  • views: 18691
videos
Quick video showing the two different types of bind, some Spektrum receivers support both preset and hold failsafe. The servos are labelled T for Throttle, A for Aileron and E for Elevator - A and E show the failsafe handling for ALL other channels except throttle. Hold failsafe - throttle goes to bind position (idle), all other channels hold last position when signal lost. Preset failsafe - all channels go to bind position when signal lost. The two binding procedures are: Preset Failsafe (where supported) power receiver with bind plug inserted, then immediately remove bind plug before switching on Tx with bind pressed. Hold failsafe power receiver with bind plug inserted and leave bind plug in while switching on Tx with bind pressed. List of receivers shown in video and the failsafe's they support below: Spektrum AR7610 - Both preset and Hold failsafe OrangeRX R800X - Both preset and Hold failsafe (I also have AR8000 which supports both preset and hold failsafe) OrangeRX R615 - only hold failsafe Spektrum AR6210 - only hold failsafe Spektrum AR6100e - Only Preset failsafe For most small models, there probably isn't much to choose, as depending on the exact circumstances where signal is lost, either may be good or bad. For GPS quadcopters with return home feature, a preset failsafe ensures the quad will return home if signal is lost, so is a big plus, you can workaround this with Naza by using Heli model type, and throttle channel for U (flight mode select) and pitch/Aux1 channel for Naza throttle, this way you are using your 'preset failsafe' throttle channel to select return home flight mode, set flat throttle curves for your flight modes (GPS/atti/manual) and flat hold throttle position for failsafe/return home. I posted another video on Naza transmitter setup which goes through this and how to safely check failsafe on the bench with props removed. My advice is to make sure you understand the two types of failsafe, and select the most appropriate one for your aircraft, also make sure you test this on the ground (with props removed for safety), so you KNOW what your model will do in the case of signal loss before it happens. Hope this is useful.
https://wn.com/Quicktip_Preset_Vs_Hold_Failsafe_Explained_Spektrum_Orangerx_Eg_Naza_Failsafe
How to Install Lightroom 6 Presets on Mac and PC

How to Install Lightroom 6 Presets on Mac and PC

  • Order:
  • Duration: 3:57
  • Updated: 22 Jun 2015
  • views: 111294
videos
More than 600 Lightroom Presets and Brushes to choose from: https://sleeklens.com/product-category/lightroom-presets/ Get 10% Discount with the code: enjoy10 Coupon works on any lightroom bundle or workflow: Written installation guides for Lightroom Brushes and Presets: https://sleeklens.com/how-to-install-lightroom-presets/ https://sleeklens.com/how-to-install-lightroom-brushes/ How to Install Lightroom 6 Presets on Mac and PC We are going to be looking at how to install Lightroom presets on your PC or Mac. Presets can be bought and then downloaded online, downloaded for free on various online platforms and they can be created. We are not going to be looking at downloading or creating the presets as that is out of the scope of this tutorial. In this tutorial, I am assuming that you have Lightroom installed, have a program that can unzip compressed files, you have downloaded a zip file with the presets or have preset files available on your computer and that you know how to navigate the folder structure of your computer be it a Mac or a PC. Without further ado, the steps: 1. Open Lightroom and open any image that you have on your computer. This is important because we will be using this image to see if the presets were installed correctly and that they work. 2. Ensure that you have gone to the develop module as shown below. Note that the active module will have white text while the modules that are unselected have grey font color. 3. After you are inside “Develop”, you will see a box of presets on your left as shown below: This box shows all of the presets that you already have installed in your Lightroom application. This is where the presets you install will be listed. 4. Now we need to go into the folder where you have the zip file of the presets downloaded into. If your presets are not inside a zip file, skip this step. For those who have their presets inside a zip file, extract them to a folder that you can access easily. For those whose presets are already unzipped or were not sipped in the first place, ensure to make note of the folder your presets reside in. Also note that Lightroom presets have an “lrtemplate” file extension 5. Go back to Lightroom and have your cursor hover anywhere inside the grey presets box. Do not left click on anything but rather right click inside this box if you are on PC or hold down command and left click. When you do, this menu will pop up: Click on new folder, enter the name of the folder where your presets will reside in. When you click create, you will see it added to the left hand side in your list of preset folders. 6. Now right click, on a PC, or hold control and left click, on a mac, on the name of the folder you have just created and left click on import. Once you do you will be taken to your file explorer where you will need to navigate to the folder where your presets reside. 7. Making sure you are in the right folder inside your file explorer, select all of the presets that you would like to import. After making the selection, click on import. 8. You will now be taken back to Lightroom where, depending on your computer speed, the presets will take a few seconds to be listed inside the folder you crated inside the presets box. 9. After you see the names of the imported presets, it is just a matter of testing these presets using the images we selected in the first step. Click on a name of a preset to apply it. http://www.infoparrot.com/how-to-install-lightroom-presets/ Learn how to install presets for Lightroom 5/6 on both MAC and PC. It's easy and takes only a couple of minutes!
https://wn.com/How_To_Install_Lightroom_6_Presets_On_Mac_And_Pc
Strymon Timeline Part II Walk through

Strymon Timeline Part II Walk through

  • Order:
  • Duration: 14:35
  • Updated: 29 Mar 2013
  • views: 60830
videos
$449.00 https://www.prymaxe.com Strymon Timeline Delay CALL TO ORDER 1-855-PRYMAXE (779-6293) When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs with an intense focus on dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed. Each algorithm is so detailed it requires the entire processor. TimeLine provides you with twelve different delay machines, each with extensive control over sonic character and feel. Tweak to your hearts content and save up to 200 presets of your favorite sounds. Go from crisp and clear, studio-quality digital delays all the way to the saturated and fluctuating sounds of tape delay machines. Get warm and fuzzy analog style repeats all the way to shimmery, sparkling, and crystalline ice delays. Top it all off with full MIDIimplementation and a routable, 30-second stereo looper and you're on your way to delay bliss Strymon Timeline Delay Features: Hand crafted, studio-class delay algorithms deliver meticulous, detailed and nuanced delay experiences Twelve delay machines to choose from: Digital, Dual, Pattern, Reverse, Ice, Duck, Swell, Trem, Filter, Lo-fi, dTape™, dBucket™. Seven front-panel tone shaping knobs: Time, Repeats, Mix, Filter, Grit, Mod Speed, Mod Depth Additional menu-driven parameters deliver extremely flexible tone shaping options and complete tweakability 200 easily accessible and nameable presets, save and recall at the press of a switch Three rugged metal footswitches for preset selection, effect bypass, looper control, and Tap Tempo LED display for preset info, BPM/time readout, and extended parameter contro Full MIDI implementation allows extended control for those with more complex rigs 30-second stereo Looper, routable pre- or post-delay, with MIDI capability.
https://wn.com/Strymon_Timeline_Part_Ii_Walk_Through
Making Insanely Difficult Selections Like Trees Using Alpha Channel in Photoshop

Making Insanely Difficult Selections Like Trees Using Alpha Channel in Photoshop

  • Order:
  • Duration: 12:06
  • Updated: 20 Apr 2017
  • views: 100463
videos
Make crazy selections no matter how precise they are using channels in Photoshop. In this video, we'll learn how to replace skies by utilizing channels for mask information and select detailed objects like grass and trees or even hair very simply. This method of making selections is like the last resort. When nothing works, be it "Select and Mask" or "Select Color Range", channels are powerful sources of creating masks to make that selection. This can be done by creating an alpha channel which is additional channel besides RGB or CMYK to hold complex masking information. Along the way, while we replace skies, we'll also look into some tips and tricks on matching the skies with the image. ► SUBSCRIBE: https://goo.gl/iaROYY If you think you can help, entertain or even disturb someone by sharing this channel's video. Go ahead! : https://goo.gl/IUhnUl ►LET'S CONNECT: Facebook: http://facebook.com/piximperfect Twitter: https://twitter.com/piximperfect Instagram: https://www.instagram.com/piximperfect Google+: https://plus.google.com/+UnmeshDinda
https://wn.com/Making_Insanely_Difficult_Selections_Like_Trees_Using_Alpha_Channel_In_Photoshop
Where to Put Plugin Preset Files (Free Sytrus Preset)

Where to Put Plugin Preset Files (Free Sytrus Preset)

  • Order:
  • Duration: 2:39
  • Updated: 03 Mar 2013
  • views: 25319
videos
AudioCollege - Your #1 Source for Everything Audio http://www.youtube.com/AudioCollege Description: -Short video showing you how to get downloaded presets to appear in the plugins preset selection menu. This video will teach you where to copy and paste the preset you download online. Check below for a link to download a free Sytrus preset. Purpose of Video: -To quickly show viewers which folder to put their download preset files so they can use them in their own projects. Supplemental Material: -Dual FM Arp 002 (Sytrus) --http://adf.ly/KBqCA --MOD X = FM Amount --MOD Y = 2nd Arp Volume + HOLD Note Volume --Play a 4 note chord with this preset for best results. -AudioCollege's - FL Studio's Preset Library --http://adf.ly/JbWWJ ----- Tweet This Sample and Get Another Exclusive Free Download by AudioCollege http://clicktotweet.com/_d9la
https://wn.com/Where_To_Put_Plugin_Preset_Files_(Free_Sytrus_Preset)
Pro Tools Tutorial: Memory Locations & Zoom Presets

Pro Tools Tutorial: Memory Locations & Zoom Presets

  • Order:
  • Duration: 8:33
  • Updated: 06 Dec 2013
  • views: 3974
videos
Learn how to use compression: http://learncompression.com Learn to mix hip-hop: http://mixinghiphop.com Improve your ears: http://quiztones.com Mixing tips: http://theproaudiofiles.com How to configure your Pro Tools recording sessions in to make it easier to jump around from one section to another. Also, how to focus on individual instruments or groups of instruments if you're going to be doing some editing. --- Transcript: I'm gonna demonstrate some tricks that you can use to configure your recording sessions inside of Pro Tools to make it easier to do things like jump around from one section of your song to another section of your song. Or do things like focus on individual instruments or groups of instruments if you know that you're going to be doing a lot of editing of them. Now it does take a bit of extra work on the front end to set up your session to do all these things, however if you do it, a lot of times this can, in fact, speed up a lot of your workflow for the remaining time that you're having to edit in that session. First is how you can use memory locations to do a bunch of different things. Also how to use zoom presets. So let's first start out with the memory locations. Many people are familiar with the basics of memory locations and what you can use them for, so for instance, as the name would suggest, you can have your computer kind of memorize the different locations or store in it's memory the parts of your song that you're interests in marking. So if you want to make the introduction, the chorus, and the verse, it's just a matter of bringing the playback head or the cursor to that location and marking it. On my computer keyboard I can use function and enter, that's gonna create a location. I'll call this intro. Next up is my first verse. I know that it's at this location right here. And create another one, call it verse 1. My chorus comes in right here. I can continue to do this for the remainder of the different sections of my song. And then, all you have to do is just click on these different memory locations, and the playback head will jump to those different parts. So if you just wanna quickly jump to the first verse — listen to that. Jump to the chorus. Or the intro. This is kind of the simplest way that you can use memory locations, so I'll come back to these in a little while, and show you some more advanced features of how to use memory locations. Next up though I want to show you zoom presets. The idea with zoom presets is you can set the relative level that you've either zoomed in or zoomed out on your session and set them to hot keys, or buttons up here. So, for instance, the most basic way to zoom is to use the zoom tool. You can zoom in and out like this. You hold the Option key, you can zoom out. So, the way that I like to do it in my sessions is to kind of start from a global perspective for the broad big picture view of my session and set this to one of the zoom presets and then kind of zoom in at these different levels and set them as different presets. [removed] Coming back to memory locations now. You can use memory locations not only just to mark the different places of your song, but to actually zoom to that section of your song too, so it's kind of like a zoom preset and memory location in one. Let me show you that. I'm gonna zoom in and just focus on this part of my song. So I'll zoom in really far, fill the screen with this chorus. Go back to my memory locations window. I'm gonna create a new one now. Call this chorus 2. Now, what I had selected before is just this marker. You can actually do things like move on and use a selection tool. What this is gonna do is allow me to set a location or a memory and store in memory the fact that I have selected with the cursor just chorus 2. So if I've got it in loop record, I don't have to go in and find that location of the song and drag it out (the cursor) just to focus on that area. I just set up that selection right here. I can go in and click on zoom settings now. And click ok. I've got chorus 2, you'll see that it's got different things over here for the selection zoom. That way now, if I go back to a different part of my song: verse 1, now I click on chorus 2, it zooms me right back in on that chorus and then it's highlighted that part so that I can just listen back just to that part if that's the way I want to edit it. [truncated]
https://wn.com/Pro_Tools_Tutorial_Memory_Locations_Zoom_Presets
How to Use REFINE EDGE in Adobe Photoshop! Improve Your Selections

How to Use REFINE EDGE in Adobe Photoshop! Improve Your Selections

  • Order:
  • Duration: 10:34
  • Updated: 12 Aug 2013
  • views: 178876
videos
Today's tutorial looks at the Refine Edge feature in Photoshop, and how it can drastically improve your selections that contain hair and/or fur. Support my content: http://www.patreon.com/howardpinsky Tools used in this tutorial: Color Range: If you're looking to select all or most of a single color in your image, Color Range will help you do that. It lets you automatically target pure colors, or sample specific colors using the eye dropper. To add to your sample, hold down shift. To subtract, hold down Alt (Windows) or Option (Mac). Pressing OK will create the selection. Refine Edge: When you initially create a selection, it's likely to be very sharp around the edges, and likely won't contain hair or fur. Refine Edge will allow you to not only soften out those edges, but you'll be able to use Smart Radius to grab hair and fur which may not have been selected. Make sure to check out my other Photoshop tutorials. Links below! MORE FROM ICEFLOWSTUDIOS: Subscribe! http://www.youtube.com/subscription_center?add_user=iceflowstudios Website! http://www.iceflowstudios.com Facebook! http://www.facebook.com/iceflowstudios Twitter! http://www.twitter.com/pinsky Google+! http://gplus.to/pinsky IceflowStudios is run by Howard Pinsky, providing FREE Adobe Photoshop and Adobe Photoshop Lightroom video tutorials to the graphic design and photographer community. As an Adobe Community Professional, Howard's Photoshop tutorials have been recognized by schools around the country, design blogs, and by Adobe. To date, the videos uploaded to the IceflowStudios YouTube channel and website have been viewed over 80 million times. No matter what you're looking to learn in Photoshop, you're bound to find it in our library of over 350 tutorials. Topics include: Text Effects in Photoshop, Photo Composition, Photo Retouching, The Basics of Photoshop, Designing in Photoshop, Special Effects, and more! While new videos will be taught using the latest version of Photoshop, you'll find videos covering Photoshop CC, Photoshop CS6, CS5, CS4, and CS3. For more information on Adobe Photoshop, check out Adobe's website at: http://www.adobe.com/products/photoshop.html For the written version of most of our tutorials, check out: http://www.iceflowstudios.com/
https://wn.com/How_To_Use_Refine_Edge_In_Adobe_Photoshop_Improve_Your_Selections
How To: Program a Radio Station in your 2015 Toyota

How To: Program a Radio Station in your 2015 Toyota

  • Order:
  • Duration: 1:47
  • Updated: 29 Jul 2015
  • views: 16732
videos
This is how you program a radio station in your new 2015 Toyota: On your Toyota dashboard screen, select "AM" or "FM". Using your tuning dial, tune to the station you would like to save. Press and hold the number on the touch screen that you would like to save this station under. This can be done in any order. When you hear the beep, the station has been saved. If you would like to save additional stations, repeat this above steps. To save stations from another source such as, Satellite or XM, select "Source". Select the source you would like. (Satellite, XM, FM or AM). Repeat the steps above. Balise Toyota Scion of Warwick 1400 Post Road Warwick, RI 02888 Sales (401) 352-5911 Service: (401) 781-4377 Parts: (401) 781-5209 http://www.balisetoyotaofwarwick.com/index.htm
https://wn.com/How_To_Program_A_Radio_Station_In_Your_2015_Toyota
Learn Adobe Photoshop - Brush Presets

Learn Adobe Photoshop - Brush Presets

  • Order:
  • Duration: 5:48
  • Updated: 27 Feb 2011
  • views: 11066
videos
SALE TODAY: Learn Piano on iOS http://bit.ly/PianoAppSale In this video, Mahalo expert Gene Shaw describes the Brush Presets Panel and explains how it's used create new brushes. Brush Presets --------------------------------------------------------------------- If you have certain brushes that you like to use, whether they're custom brushes that you've created or belong to the set of defaults within Photoshop, you can save groups of them in the Brush Presets Panel for rapid access. Photoshop attempts to simulate many types of illustration and pairing tools. Adobe starts you off with options that can be accessed in the Brush Presets Panel. 1. Open the Brush Presets Panel by clicking Window -- Brush Presets in the top menu bar and making sure it's checked.2. On the left side in the panel you can see what the brush looks like and on the right side you can see a simple stroke using that brush. This way you can see before making your selection what each brush does for you. 3. Once you select a brush you can change its size by moving the slider at the top of the panel left or right. You can do this same thing by right-clicking in the middle of your workspace with your brush selected.4. If you have a tablet like a Wacom tablet, you can click the Bristle Brush Preview button in the bottom right corner of the panel to bring up a window that shows you the angle at which you hold your pen in relation to the tablet, as well as the pressure you apply to the tablet.5. There is also an icon in the upper right corner of the panel to toggle the Brush Panel.6. In the panel menu area, there are different groupings of brushes such as Assorted Brushes, Basic Brushes, Calligraphic Brushes, etc. Choosing any one of these will bring up a dialogue box asking you to choose Append, Cancel or OK. Append adds the brush set that is selected to the current set that is open. Choosing OK will make the current set go away and show only the set you've just chosen.7. To create your own brush set by first showing only the brushes you wish to keep in the panel. Click on the Panel Menu and choose Save Brushes. Once saved, you can go back into the Panel Menu and choose Load Brushes to load the brush presets you just saved. The Load option will always Append the brushes to the end of whatever set you have open. Read more by visiting our page at: http://www.mahalo.com/learn-adobe-photoshop-brush-presets/
https://wn.com/Learn_Adobe_Photoshop_Brush_Presets
How to use the 2013 VW Premium VIII Radio

How to use the 2013 VW Premium VIII Radio

  • Order:
  • Duration: 2:37
  • Updated: 25 Mar 2013
  • views: 46047
videos
How to connect your MP3 player to your Premium VIII Radio. ------------------------------------------------------- Connecting your MP3 player (You have to have an auxiliary or optional MDI cable) 1. Press SETUP hard key. 2. Press MEDIA soft key. 3. Check ACTIVATE AUX INPUT. 4. Press MENU hard key. Streaming audio over Bluetooth 1. Pair your phone. 2. Play music. 3. Press MEDIA hard key. 4. Touch BT-AUDIO soft key. Using the CD player 1. Press the LOAD/EJECT button. 2. Press any of the 6 soft keys and load CD. 3. Press the MEDIA hard key. 4. Touch CD soft key. Preset radio stations (Up to 24 preset channels may be stored) 1. Press TUNE soft key 2. Use knob to select a station 3. Press & hold any of the 6 preset soft keys Have other questions? Visit http://www.vw.com/2013 Instruction only applicable to 2013 Passat, Golf, GTI, Tiguan, Jetta, Jetta Hybrid, Jetta SportWagen, CC, Eos, Jetta, Beetle and Beetle Convertible models with optional Premium VIII.
https://wn.com/How_To_Use_The_2013_Vw_Premium_Viii_Radio
Build Your Own Tap Tempo and Preset Selector for Nova Delay

Build Your Own Tap Tempo and Preset Selector for Nova Delay

  • Order:
  • Duration: 5:06
  • Updated: 25 Jan 2013
  • views: 7170
videos
In my last video I modified a TC Electronic Nova Delay to have External Tap Tempo and Preset Selector capabilities. This video shows you how to construct your own tap tempo pedal to take advantage of this. This pedal works with the Nova delay and Boss units. It may well work for other delay units, I haven't tried them. All parts for this pedal were ordered from http://www.pedalpartsaustralia.com/ and came to a total of around $15. Should you choose to only have tap tempo or preset selection, then you only require 1 switch and Tip/Sleeve or mono jacks, not Tip/Ring/Sleeve stereo jacks for the output. The video for the Nova Delay modification can be found here: https://www.youtube.com/watch?v=dh-_wn2VkF0 FYI, some people (myself included) noticed that Boss and TC units didn't sync up at the same time. This can be seen in the video. I personally didn't notice because I have a fairly even stroke when pressing these pedals, and the Boss and TC units have different time measuring clocks, so the numbers will always be different. That said, Boss use a Normally Closed (NC) circuit, and TC use a Normally Open (NO) circuit. If your Boss registers your tap when you press the switch, and the TC registers the tap when you release the switch, then you may need a DPDT momentary switch, instead of the SPST switches shown in the video. In this case the Sleeve of your jacks each need to be connected to a center prong, and the Tips of your jacks will need to be connected to either the NC or NO pole according to with pedal is being used. This will cause the boss and TC units to sync up at the same time. Hope this helps. Feel free to comment or PM me with any questions. You can find a DPDT switch here: http://www.pedalpartsaustralia.com/index.php?main_page=product_info&cPath=1_13&products_id=45
https://wn.com/Build_Your_Own_Tap_Tempo_And_Preset_Selector_For_Nova_Delay
Allen & Heath Qu Series - Getting Started

Allen & Heath Qu Series - Getting Started

  • Order:
  • Duration: 4:06
  • Updated: 12 Mar 2014
  • views: 134915
videos
QU Getting Started: This video will give you an overview of the Qu layout and operation. Qu-16 has 16 identical fader strips in one bank. Qu-24 has 24. These provide access to the input and master channel levels and processing. There are three Layers. Press the lower key to access the Mono channels, the upper key to access the stereo channels, FX returns, FX send and Mix masters. Press both keys together to access the Custom Layer. The faders are motorised and instantly move to show the current settings. The Mute key turns off the channel audio signal, including the send to all mixes and effects. Press the Select key to access the channel processing. Pan and other parameters can be adjusted using either the SuperStrip controls or the full colour touchscreen with dedicated Screen keys. Press the PAFL key to listen to a channel using headphones and check its level on the main meters. The strip meters let you keep an eye on signal levels by displaying channel levels before the fader and mute control. Peak lights red to warn that the signal is too hot and gain should be reduced. Peak senses the signal at several points within the channel. Qu provides an extra, dedicated fader strip for the Mix Master currently selected using the Mix keys alongside. During normal operation this is set to the main LR mix and the other faders control the main level of the corresponding channels. Pressing another Mix key presents the sends to that mix or effect on the channel faders. Move a fader to adjust its send level. When a stereo Mix is active, the Pan rotary in the SuperStrip will control the channel send pan to the active mix. Channels can be set pre or post-fade and assigned to the currently selected mix using the Select keys. Hold the Assign key to view and toggle the current assignments - the Select keys light when the channel is assigned to the mix. Similarly, hold the Pre Fade key to view and toggle the current pre/post fade settings - the Select keys light when set to pre-fade. It is typical to use pre-fade for monitor sends and post-fade for effects sends. Alternative access to mix assignments and send levels for the currently selected channel is provided in the Routing screen. This also gives access to Direct Out global settings and Mute Group master controls and setup. To assign a single channel or effect to one of the four Mute Groups, use the Mute Group Assign tab. To assign multiple channels, press the Function key and select the tab for the Mute Group you wish to assign. Mute masters can be accessed from the Home screen too, or assigned to the SoftKeys. Pressing a Mute master instantly mutes all assigned channels, for example all the drum kit, or all FX returns between songs. The Mute keys will flash red to show that the channel is muted by a Mute Group. While mixing, the Meters screen provides a convenient view of all channel, mix and FX signal activity. For optimum performance the loudest signals should read into the yellow. Reduce the level to avoid distortion if any red Peak meter flashes. Increase levels if the meter readings are consistently low. Finally, the RTA screen displays a Real Time Analyser of the frequency content of the signal currently monitored using the PAFL keys. This is a useful tool to help you identify problem frequencies such as room resonance and feedback. Regardless of the screen you are in, the toolbar always displays useful information including the Current last recalled scene and Next scene as selected in the Scenes list, the behaviour of the Function key, a dSNAKE status icon to show connection of an AudioRack, a USB icon when a compatible USB drive is plugged in, and the Qu-Drive recording and playback transport status. To safely shut down the mixer, touch Shut Down in the Home screen before pressing the On/Off power switch.
https://wn.com/Allen_Heath_Qu_Series_Getting_Started
Omnisphere 2: Best Synth Presets? - Making a beat + In Depth Review (Cop or Drop?)

Omnisphere 2: Best Synth Presets? - Making a beat + In Depth Review (Cop or Drop?)

  • Order:
  • Duration: 6:54
  • Updated: 28 Jul 2017
  • views: 15789
videos
ENTER MY SERUM VST GIVEAWAY ($189 Value Synth) - http://seribeats.com --- Overall Omnisphere 2 is dope but definitely not something I would use consistently other than for the presets. Even after I got used to the interface it didn't feel intuitive for sound design. Here's what I liked and didn't like about it... Liked: 1. Huge library and huge selection of presets and packs. 2. Packed with synth features and rhythmic/arp options to make complex sounds. You will never run out of Oscillators :) 3. Has high quality effects and Oscillators. Didn't Like: 1. Not intuitive for doing quick or simple sounds. 2. CPU use increases significantly when you start pushing it. 3. VERY LITTLE Visual feedback. Bad for precise design. Final Opinion - 2:56 808 Essentials Kit - http://bit.ly/2neSelC --- Check me out: https://soundcloud.com/seri Contact me - contact@seribeats.com --- Twitter: @seribeats (http://bit.ly/tweetseri) Instagram: @seribeats (http://bit.ly/instaseri) Snapchat: @seribeats (http://bit.ly/snapseri) -------------------------
https://wn.com/Omnisphere_2_Best_Synth_Presets_Making_A_Beat_In_Depth_Review_(Cop_Or_Drop_)
How to Sharpen Photos Cleanly Without Affecting Edges in Photoshop

How to Sharpen Photos Cleanly Without Affecting Edges in Photoshop

  • Order:
  • Duration: 4:33
  • Updated: 30 Aug 2017
  • views: 4214
videos
In this photoshop photo editing tutorial, learn how to sharpen your photos cleanly in photoshop without affecting edges and that black and white edging won’t be a problem anymore while sharpening. ►Download PSD file: http://photoshopdesire.com/sharpen-photos-cleanly-without-affecting-edges-photoshop/ 1 00:00:14 Quick Photoshop Tip: A Cleaner Way to Sharpen Your Photos in Photoshop. 2 00:00:24 Duplicate your background layer. 3 00:00:36 Select your whole image (CTRL+A or Command+A). 4 00:00:45 copy it (CTRL+C or Command+C). 5 00:00:56 create a new Alpha channel in the Channels tab. 6 00:01:05 Paste your selection onto that “Alpha 1” Channel (CTRL+V or Command+V). 7 00:01:17 Go to Filter - Stylize - Find Edges. 8 00:01:25 [If needed] Add some contrast between the edges and white parts of the image to make the dark lines thicker. 9 00:01:36 The hardest edges are now masked out. 10 00:01:48 Hold CTRL (or Command) & click on the “Alpha 1” channel to select edges. 11 00:02:02 Convert background copy layer into a Smart Object. 12 00:02:11 Add mask to the layer. 13 00:02:31 Select the same layer again, and go to Filter - Sharpen - Unsharp Mask. 14 00:02:42 adjust the amount slider to your taste and preference. 15 00:03:08 Hold Alt or Option key and click on mask to view it. 16 00:03:18 Go to properties and feather the mask to soften the lines and make the edges of the image look a bit more natural. 17 00:03:36 That's it. 18 00:03:44 You can see that photo is very clean without any black and white edging. ►SUBSCRIBE: https://goo.gl/d31fld Don't forget to COMMENT, LIKE and SHARE, to get more :) Follow US - LET'S BE FRIENDS! ------------------------------------------ ►Official Website: http://www.photoshopdesire.com ►FACEBOOK : http://www.facebook.com/photoshopdesire ►GOOGLE+ : https://plus.google.com/+photoshopdesiretv ►Twitter : https://twitter.com/PSDesire ►Instagram: https://www.instagram.com/photoshopdesire Softwares Used: ---------------------------- Photoshop cc 2014, 2015, 2017 Photoshop cs5, cs6, After Effects cs5 Camtasia Studio Music: ------------ Faith (YouTube Library) ►Check out all tutorial here : https://www.youtube.com/photoshopdesiretv/videos How to Sharpen Images in Photoshop. Tutorial explains how to keep clean edges when sharpening images. Selective Sharpening Using High Pass in Adobe Photoshop. How to Sharpen Image Edges in Photoshop. Take Control Sharpening in Photoshop. Mastering Image Sharpening in Photoshop . Photoshop: How To Correctly Sharpen an Image. A Better Way to Sharpen Images in Photoshop. How to Get Sharper Images with Selective Sharpening. How to Fix Blurry Photos in Photoshop. How To Sharpen Photos Cleanly In Photoshop Without Edging. Best nondestructive way to sharpen photos in Photoshop. Photo Tip - Advanced Sharpening in Adobe Photoshop. Tutorial: How to Sharpen Photos in Photoshop with the Unsharp Mask. How to Non-destructively Sharpen Your Image In Photoshop. Sharpening Techniques photoshop tutorial. Thanks for watching our free Tutorials! If you enjoyed our video be sure to subscribe to our channel to receive free new videos. Check Out Our Playlists: -------------------------------------- Photoshop Tutorials for Beginners, Intermediate and Advanced users https://www.youtube.com/playlist?list=PLGLEKqTDn233O6PusOR1lEvRwjlErdCYV Easy, Quick and Fast Photoshop Tutorial Series (NEW) https://www.youtube.com/playlist?list=PLGLEKqTDn230TS2NzqA2BGblNYZ4NpGWT HDR Photography Using Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn232tlbcBJHNiEPj1h0wPJvVG Photo Editing, Photo Effects & Photo Manipulation - Special FX https://www.youtube.com/playlist?list=PLGLEKqTDn233VC9ZDSiLav8bI8FKJ93ny Adobe Camera Raw Filter Tutorials and Preset downloads (same settings steps for lightroom also) https://www.youtube.com/playlist?list=PLGLEKqTDn233ab_cdALEjtjGASqtTie10 Color Grading or Coloring in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233uKTZWUFq7GwgNB6BJyM7m Skin, Face & Body Retouching Techniques and Enhancing Tips https://www.youtube.com/playlist?list=PLGLEKqTDn232WN_N6Ek-vnfzr7nNKDHWT Free Photoshop Actions for Photographers and Designers https://www.youtube.com/playlist?list=PLGLEKqTDn233ZVGBJWihIuxGrav7VTCCD Text and Graphics Effects in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233zMfRfoFl-ZwIzzUmf9UDu
https://wn.com/How_To_Sharpen_Photos_Cleanly_Without_Affecting_Edges_In_Photoshop
How to Change Hair Color with Curves in Photoshop - Quick Coloring Tips & Tricks

How to Change Hair Color with Curves in Photoshop - Quick Coloring Tips & Tricks

  • Order:
  • Duration: 6:02
  • Updated: 21 Oct 2017
  • views: 2594
videos
In this photoshop manipulation tutorial, learn How to change hair color or dye hair easily using curves in photoshop. ►Download PSD file: http://photoshopdesire.com/change-hair-color-curves-photoshop-quick-easy/ ►Download Photo: https://www.flickr.com/photos/psdesire/37830895431 First of all, Add new curves adjustment to colorize hair. I want to convert her hair to "RED HEAD". So select red curve and drag upward to apply red tones. Now select the skin tones and exclude color from skin. To do that, go to select menu - choose color range. Now select "SKIN TONES" option from drop down list. Hold ALT or OPTION key and click on layer mask to view it. We want to add color to hair not skin, so go to adjustments and select "INVERT" CTRL + I. Take soft brush and paint with black to remove effect from unnecessary areas like eyes etc. Now soften the edges of the mask to blend color well with the edges. Go to filter menu - Blur - select Gaussian Blur. Keep radius around 20px (it depands on size of your image). To remove color from shadows, Take soft brush and lower the flow and paint on shadow areas. Hair color looks good enough. Now Mask the background to keep it original. Select curves layer and group it CTRL + G. Now again go to color range. Select sampled colors option. Select background using plus eyedropper tool. With the selection ON, hold ALT or Option Key and click on vector mask icon. Go to filter menu - Blur - select Gaussian Blur. Keep radius around 20px to soften edges and blend with effect. Double click on curves thumbnail and add or change color to your liking. Select blue curve and drag downwards to add yellows to hair. That's it. We're Done. How to Realistically Change Hair and Fur Color in Adobe Photoshop. 3 Steps to Easily and Realistically Change Hair Color in Photoshop. How to Make Hair Color POP in Photoshop. How to Dye Hair at Home (Coloring Tips & Tricks). How To Color Your Hair | Quick & Effortless. ►Check out all tutorial here : https://www.youtube.com/photoshopdesiretv/videos Thanks for watching our free Tutorials! If you enjoyed our video be sure to subscribe to our channel to receive free new videos. ►SUBSCRIBE: https://goo.gl/d31fld Don't forget to COMMENT, LIKE and SHARE, to get more :) Follow US - LET'S BE FRIENDS! ------------------------------------------ ►Official Website: http://www.photoshopdesire.com ►FACEBOOK : http://www.facebook.com/photoshopdesire ►GOOGLE+ : https://plus.google.com/+photoshopdesiretv ►Twitter : https://twitter.com/PSDesire ►Instagram: https://www.instagram.com/photoshopdesire Softwares Used: ---------------------------- Photoshop cc 2014, 2015, 2017 Photoshop cs5, cs6, After Effects cs5 Camtasia Studio Music: ------------ Faith (YouTube Library) Check Out Our Playlists: -------------------------------------- Photoshop Tutorials for Beginners, Intermediate and Advanced users https://www.youtube.com/playlist?list=PLGLEKqTDn233O6PusOR1lEvRwjlErdCYV Easy, Quick and Fast Photoshop Tutorial Series (NEW) https://www.youtube.com/playlist?list=PLGLEKqTDn230TS2NzqA2BGblNYZ4NpGWT HDR Photography Using Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn232tlbcBJHNiEPj1h0wPJvVG Photo Editing, Photo Effects & Photo Manipulation - Special FX https://www.youtube.com/playlist?list=PLGLEKqTDn233VC9ZDSiLav8bI8FKJ93ny Adobe Camera Raw Filter Tutorials and Preset downloads (same settings steps for lightroom also) https://www.youtube.com/playlist?list=PLGLEKqTDn233ab_cdALEjtjGASqtTie10 Color Grading or Coloring in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233uKTZWUFq7GwgNB6BJyM7m Skin, Face & Body Retouching Techniques and Enhancing Tips https://www.youtube.com/playlist?list=PLGLEKqTDn232WN_N6Ek-vnfzr7nNKDHWT Free Photoshop Actions for Photographers and Designers https://www.youtube.com/playlist?list=PLGLEKqTDn233ZVGBJWihIuxGrav7VTCCD Text and Graphics Effects in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233zMfRfoFl-ZwIzzUmf9UDu
https://wn.com/How_To_Change_Hair_Color_With_Curves_In_Photoshop_Quick_Coloring_Tips_Tricks
How to Name and Save Presets - Strymon TimeLine & Mobius

How to Name and Save Presets - Strymon TimeLine & Mobius

  • Order:
  • Duration: 2:02
  • Updated: 01 Apr 2013
  • views: 34000
videos
Our main channel: http://youtube.com/strymon More tutorial videos: http://youtube.com/strymonsupport In this video we'll show you how to name and save presets on your TimeLine and Mobius.
https://wn.com/How_To_Name_And_Save_Presets_Strymon_Timeline_Mobius
TEKKEN 7 - Controller Setup In Character Select Screen

TEKKEN 7 - Controller Setup In Character Select Screen

  • Order:
  • Duration: 0:58
  • Updated: 01 Jun 2017
  • views: 12751
videos
Controller Setup in Character Select Screen @ TEKKEN 7 (PS4) https://www.tekkenzone.net
https://wn.com/Tekken_7_Controller_Setup_In_Character_Select_Screen
How to Install Lightroom 6 Presets on Mac and PC + Download 2600+ Presets Lightroom

How to Install Lightroom 6 Presets on Mac and PC + Download 2600+ Presets Lightroom

  • Order:
  • Duration: 13:13
  • Updated: 09 Nov 2015
  • views: 17470
videos
How to Install Lightroom 6 Presets on Mac and PC Bonus Free Download more than 2600+ premium lightroom preset here : https://goo.gl/AFX7OJ (2 mb. Google Drive) *sorry, some presets error, so make it not responding. :) We are going to be looking at how to install Lightroom presets on your PC or Mac. Presets can be bought and then downloaded online, downloaded for free on various online platforms and they can be created. We are not going to be looking at downloading or creating the presets as that is out of the scope of this tutorial. In this tutorial, I am assuming that you have Lightroom installed, have a program that can unzip compressed files, you have downloaded a zip file with the presets or have preset files available on your computer and that you know how to navigate the folder structure of your computer be it a Mac or a PC. Without further ado, the steps: 1. Open Lightroom and open any image that you have on your computer. This is important because we will be using this image to see if the presets were installed correctly and that they work. 2. Ensure that you have gone to the develop module as shown below. Note that the active module will have white text while the modules that are unselected have grey font color. 3. After you are inside “Develop”, you will see a box of presets on your left as shown below: This box shows all of the presets that you already have installed in your Lightroom application. This is where the presets you install will be listed. 4. Now we need to go into the folder where you have the zip file of the presets downloaded into. If your presets are not inside a zip file, skip this step. For those who have their presets inside a zip file, extract them to a folder that you can access easily. For those whose presets are already unzipped or were not sipped in the first place, ensure to make note of the folder your presets reside in. Also note that Lightroom presets have an “lrtemplate” file extension 5. Go back to Lightroom and have your cursor hover anywhere inside the grey presets box. Do not left click on anything but rather right click inside this box if you are on PC or hold down command and left click. When you do, this menu will pop up: Click on new folder, enter the name of the folder where your presets will reside in. When you click create, you will see it added to the left hand side in your list of preset folders. 6. Now right click, on a PC, or hold control and left click, on a mac, on the name of the folder you have just created and left click on import. Once you do you will be taken to your file explorer where you will need to navigate to the folder where your presets reside. 7. Making sure you are in the right folder inside your file explorer, select all of the presets that you would like to import. After making the selection, click on import. 8. You will now be taken back to Lightroom where, depending on your computer speed, the presets will take a few seconds to be listed inside the folder you crated inside the presets box. 9. After you see the names of the imported presets, it is just a matter of testing these presets using the images we selected in the first step. Click on a name of a preset to apply it.
https://wn.com/How_To_Install_Lightroom_6_Presets_On_Mac_And_Pc_Download_2600_Presets_Lightroom
Simple Retouching Trick For Amazing Portraits - Make Skin Look Smooth and Bright in Photoshop

Simple Retouching Trick For Amazing Portraits - Make Skin Look Smooth and Bright in Photoshop

  • Order:
  • Duration: 6:37
  • Updated: 24 Nov 2017
  • views: 3720
videos
In this photoshop retouching tutorial, i'm going to show you how to make skin look smooth and bright using Adobe Photoshop. Some retouching methods require a lot more care and attention. while other techniques are very quick and easy. Here, i’ll give you one of those simple skin-retouching trick, that will help you create amazing portraits in no time. ►Download PSD file: http://photoshopdesire.com/simple-skin-retouching-trick-amazing-portraits-photoshop/ ►Download Photo to practice: https://www.flickr.com/photos/psdesire/37896996574 Duplicate background layer ‘CTRL+J’ (on WIndows) or ‘CMD+J’ (on a Mac). Rename the layer to "Skin Smoothing". Right-click on the layer and click ‘Convert to Smart Object’. Now go to image menu - adjustments - select invert CTRL + I keyboard shortcut. Then go to Filter menu to find the ‘other’ option, and select "high pass filter". Choosing right radius is very tricky. The key hint is increase the "Radius" value, until you notice halos starting to appear around the edges. In this case i'll set the radius value between 25 - 30px. Click ‘OK’ to apply the High Pass effect. Change the layer blend mode to ‘Overlay’ Add layer mask to the skin smoothing layer. Select layer mask and go to image menu, choose apply image. Keep settings to default and click ok. Take soft brush tool. Set brush blending to overlay. Choose foreground color white and paint on areas to apply the skin-smoothing effect. For a natural effect, You’ll also want to keep quite a lot of the face’s natural details in there, such as fine lines. So to do that duplicate background layer again and name it "Skin Texture". Move the layer to top and convert layer to smart object. Go to filter menu - other - select high pass. keep radius around 2-3px to retain fine details. Click ok. Change layer blending to overlay. If you want to change any settings, simply double click on smart filter and tweak it to your liking. Now let's sculpt and contour the subject face for a really pleasing look. Create a new layer from all the visible layers by pressing Ctrl+Shift+Alt+E. Rename layer to Stamp Copy DODGE & BURN. Change the layer blending to screen to lightens the overall image. Now double click on the layer to open blending options. Go to blend if section. The important slider here is Underlying Layer. we need to minimize the lighten affect from the shadows and keep the affect on forehead, nose, cheek bone, and chin. So drag the black triangles to the right until you will see that the particular lighten areas are influenced. Now Hold Option or Alt Key click on the triangles splits them so you can feather the blending and add depth to the highlights. click ok to apply the changes. Now lower the layer opacity to your preference. Final step go to adjustments, add color lookup to apply color tone. Select any preset from the drop down list to your liking. That's it. We're done. ►Check out all tutorial here : https://www.youtube.com/photoshopdesiretv/videos High-End Skin Softening in 1 Minute or Less in Photoshop https://www.youtube.com/watch?v=89AowdLeZUA The Amazing Power of Frequency Separation Retouching in Photoshop https://www.youtube.com/watch?v=ldhG9fmgC7o Photoshop Tutorial: How to Quickly Smooth Skin and Remove Blemishes & Scars https://www.youtube.com/watch?v=DmgyRK6H5wk Retouch, Airbrush, and Smooth Skin Professionally in Photoshop https://www.youtube.com/watch?v=N8XqJ8CQFVY professional photo retouching / change skin color photoshop tutorials https://www.youtube.com/watch?v=z149mTTywgY Portrait Skin Retouch & Color Editing - EDIT WITH ME! https://www.youtube.com/watch?v=3oY4Ex1AN20 Thanks for watching our free Tutorials! If you enjoyed our video be sure to subscribe to our channel to receive free new videos. ►SUBSCRIBE: https://goo.gl/d31fld Don't forget to COMMENT, LIKE and SHARE, to get more :) Follow US - LET'S BE FRIENDS! ------------------------------------------ ►Official Website: http://www.photoshopdesire.com ►FACEBOOK : http://www.facebook.com/photoshopdesire ►GOOGLE+ : https://plus.google.com/+photoshopdesiretv ►Twitter : https://twitter.com/PSDesire ►Instagram: https://www.instagram.com/photoshopdesire Softwares Used: ---------------------------- Photoshop cc 2014, 2015, 2017 Photoshop cs5, cs6, After Effects cs5 Camtasia Studio Music: ------------ Inner light (YouTube Library)
https://wn.com/Simple_Retouching_Trick_For_Amazing_Portraits_Make_Skin_Look_Smooth_And_Bright_In_Photoshop
Excel 2013 Tutorial For Noobs Part 23: How to Select a Range of Cells & Cells in Multiple Worksheets

Excel 2013 Tutorial For Noobs Part 23: How to Select a Range of Cells & Cells in Multiple Worksheets

  • Order:
  • Duration: 4:32
  • Updated: 07 Feb 2013
  • views: 28789
videos
http://www.excelfornoobs.com In this Microsoft Excel tutorial for beginners I show you how to select an entire column, an entire row and how to select a range of cells in a single sheet or how to edit cells in multiple worksheets at the same time. This Excel tutorial works for Microsoft Excel 2007, Excel 2010 and Excel 2013. There are multiple ways to select cells, a range of cells or multiple ranges of cells in Excel. Sometimes you might even need to know how to select multiple noncontiguous ranges in multiple worksheets to make one single change. This would be much more efficient than making the same change cell by cell. If you are this far along then I assume you are already familiar with how to select cells so I will only cover additional cell selecting techniques that you might have not discovered yet. Selecting Entire Rows and Columns To select an entire row or column simply click on the row number or column letter. Now any commands you click on will affect every cell within the selected column. To select multiple adjacent rows or columns click on the row number or column letter and while holding the left-click button drag your mouse over the range of columns or rows you want to select. Now any command you click will affect all cells in the ranges or columns you have selected. To select multiple rows or column that are not adjacent to each other click on a row number or column letter, hold down CTRL and select all the other rows or columns you want to include in the selection. To select and entire row or columns click on a row number or column letter and press CTRL + SHIFT + SPACEBAR. Now all commands will affect the entire sheet. Select Multiple Ranges of Cell Simultaneously There may be times that you want to select multiple ranges of cells that are not connected. Select a range of cells, press and hold CTRL and then select the other range of cells you want to be select. You can do this for as many cell ranges as you need. Another way to perform this action is to select a cell, press and hold SHIFT and then click on the opposite corner of the range of cells. Then press and hold CTRL and click the first cell in the next range of cells you are going to select. Now press and hold SHIFT and select the cell in the opposite corner of the range. You can also select a range of cells by manually entering it using the Find and Select command. In the Home tab under the Editing group click Find & Select and from the drop-down menu click on Go To.... The Go To dialog box will appear. In the Reference box enter the range of cells you want to select and click OK. If cell A1 was going to be the top left cell in the range and cell F20 was going to be the bottom right cell in the range then you would enter A1:F20 in the reference box and press OK. How to Select Cells and Ranges in Multiple Worksheets Simultaneously Suppose you have a workbook that contains identically formatted tables in separate worksheets. This could be the case if you had a workbook that contained quarterly sales reports, budgets, scenarios etc. You might want to make changes to the borders, fill colors or other types of cell formats. To select cell ranges among multiple sheets first activate all sheets by selecting all worksheet tabs while holding the CTRL button. Now select the range of cells in the worksheet that is showing. Any changes you make to the format of the cells will be made in the same range of cells in every worksheet that you selected. When you have multiple worksheets selected, Excel is in Group Mode. Your title bar should have [Group] next to the file name. If you want to select all worksheets in a workbook you can right-click and from the shortcut menu click Select All Sheets. NOTE: In group mode not all commands are available. For example if you click on the Insert tab you will see that almost every command on the ribbon is deactivated. Please be sure to rate, subscribe and share our videos. Please also visit our website at http://www.excelfornoobs.com. You can also add us on Facebook to keep updated. The links can be found on our Youtube channel. https://www.youtube.com/user/Subjectmoney https://www.youtube.com/watch?v=ILQ-rXjNGmU
https://wn.com/Excel_2013_Tutorial_For_Noobs_Part_23_How_To_Select_A_Range_Of_Cells_Cells_In_Multiple_Worksheets
Why EVERY photographer should be using LIGHTROOM!

Why EVERY photographer should be using LIGHTROOM!

  • Order:
  • Duration: 15:41
  • Updated: 18 Jun 2017
  • views: 1158227
videos
NEW! Lightroom PRESET PACK: https://sellfy.com/p/QjNY/ - Edit your photos with 15 brand new presets! Colour grade your footage & photos! : https://sellfy.com/p/EaHg/ Get a website! https://www.squarespace.com/mckinnon - save 10%! - ALL of the Music I use: https://goo.gl/IMZC9A - AMAZING for YouTubers. Sign up! What's up guys! Today we are diving in to LIGHTROOM! Lightroom is massive. I tried to make this quick but, there is SO much to go over and Sao many incredible tips and tricks to really take your photos to the next level. Hope you enjoy! THE GEAR I USE: My Super Awesome Tactical Camera Bag : http://amzn.to/2m8jnaT My MAIN Camera - http://amzn.to/2kdu35o My Second Backup Camera - http://amzn.to/2r29gGg My FAVOURITE Lens Ever - http://amzn.to/2kQNK4U The Lens I am currently using right for EVERYTHING - http://amzn.to/2r2BssE The Magic Canon Lens of Life - http://amzn.to/2kXF9Qm The Mic I use - http://amzn.to/2l23rrZ The Boom Mic I use for Crispy Audio : http://amzn.to/2t1MqyX My Drone - http://amzn.to/2kdE3M7 My Bigger Drone - http://amzn.to/2r2czgx The stabilizer I use with iPhone : http://amzn.to/2kWhajI My Slider - http://amzn.to/2sKyaeS The BEST monopod - http://amzn.to/2lOPnn3 GoPro HERO 5 - http://amzn.to/2l1Nhit FOLLOW ME: Instagram: https://www.instagram.com/petermckinnon/ Twitter: https://twitter.com/petermckinnon Facebook: https://www.facebook.com/petermckinnonphoto Website: http://www.petermckinnon.com SEND STUFF TO: Peter McKinnon PO Box #175 Keswick, Ontario L4P3E2 CANADA
https://wn.com/Why_Every_Photographer_Should_Be_Using_Lightroom
Canon 5D Mark IV Tips & Tricks - Custom Button Setup (Fixed Audio)

Canon 5D Mark IV Tips & Tricks - Custom Button Setup (Fixed Audio)

  • Order:
  • Duration: 6:50
  • Updated: 01 Oct 2016
  • views: 55216
videos
➨ My Recommended Gear: https://kit.com/photorectoby 🌠 For 10% off your first purchase, go to http://www.squarespace.com/photorectv 🔥 Join an awesome community and learn photography - https://photoenthusiastnetwork.com/ Win $6,000 worth of Photo Gear and Workshop http://photorec.tv/giveaway A new feature of the Canon 5D Mark IV provides excellent customization for AF and general efficient use of this professional camera. I show you how to switch from ONE SHOT to AI SERVO, back button focus and a few more Canon 5D Mark IV Tips and Tricks for customizing. Follow me on instagram for more 5D Mark IV from Scotland: http://instagram.com/photorectoby/ More about the Canon 5D Mark IV: http://photorec.tv/5DM4 Buy the Canon 5D Mark IV: http://bhpho.to/2cAimXL Try the Canon 5D Mark IV yourself- Rent from Lens Pro to Go: http://bit.ly/LPTGPhotoRec Use CODE PHOTOREC5D and get 10% off any rental of $125 or more. Expires October 31, 2016 Want to Vote: http://photorec.tv/vote Eye Cups for Sony Cameras: http://photorec.tv/eyecups Find and Follow me at: http://instagram.com/photorectoby/ http://photorec.tv https://twitter.com/photorectoby https://www.facebook.com/photorec.tv 500px https://500px.com/photorectoby SUBSCRIBE http://www.youtube.com/user/camerarectoby?sub_confirmation=1 Video - -Music: https://soundcloud.com/megaenx/space-debris Follow me on Instagram https://www.instagram.com/photorectoby/
https://wn.com/Canon_5D_Mark_Iv_Tips_Tricks_Custom_Button_Setup_(Fixed_Audio)
How to Cutout Hair Without Fringing in Photoshop - Hair Masking Easy & Fast !!!

How to Cutout Hair Without Fringing in Photoshop - Hair Masking Easy & Fast !!!

  • Order:
  • Duration: 8:28
  • Updated: 05 May 2017
  • views: 19031
videos
Download Stock Image & PSD file: http://photoshopdesire.com/cutout-hair-without-fringing-photoshop/ In this photoshop tutorial shows you how to cutout or mask hair in Photoshop. Cutting hair without fringing (light or white part around the edges of the hair) is tough job, but i will show you tip to achieve perfect hair selection and masking. 00:14 How to cutout tricky hair perfectly without fringing in photoshop 00:23 First take any selection tool and select the background 01:20 go to select and inverse the selection 01:33 click on select and mask feature 01:52 Take refine edge tool and paint on edges of the hair 02:03 check smart radius, Photoshop looks more closely along the edge of the initial selection especially hair and shoulder selection 02:12 Now just paint on edges 02:45 we will remove any extra white matte later 03:50 Output The Selection to New Layer with Layer Mask 04:03 lets add any background color and check how it looks 04:19 see there is lot of halo edges and fringe 04:32 to remove it, duplicate the layer with layer mask 04:45 select layer mask and apply layer mask command 04:59 then go to layer - matting - remove white matte 05:14 see now hair edges are good, but it lost some of tiny small hair strands around 05:27 lets bring lost hair into selection 05:34 select this layer in blending options 05:39 Hold the Alt key and drag the white slider 05:48 this we will partially hide the gray portions and achieve a better blending with hair color & texture 06:03 now select apply layer mask and then go to matting - choose defringe 06:24 thta's it. 06:45 now place cutout layer on any background 07:25 see we cutout the hair without missing single strand and any fringing. I hope that you enjoyed this tutorial. How to extract hair from a messy background in Photoshop and paint hair back. How To Remove Background Around Lots Of Hair Photoshop. How to Cut Out Hair with Channels in Photoshop. How to Cut Out Hair Smoothly in Photoshop. Photoshop Tutorial How To Change Background. Advanced Tutorial: How to Select Difficult Hair in Photoshop CC. Advance Hair Selection Tutorial - Masking Hair In Photoshop. Tricky Cut Outs made EASY and FAST: PHOTOSHOP. How to Use the Refine Edge Tool in Photoshop. ►Check out all tutorial here : https://www.youtube.com/photoshopdesiretv/videos Thanks for watching our free Tutorials! If you enjoyed our video be sure to subscribe to our channel to receive free new videos. ►SUBSCRIBE: https://goo.gl/d31fld Don't forget to COMMENT, LIKE and SHARE, to get more :) Follow US - LET'S BE FRIENDS! ------------------------------------------ ►Offical Website: http://www.photoshopdesire.com ►FACEBOOK : http://www.facebook.com/photoshopdesire ►GOOGLE+ : https://plus.google.com/+photoshopdesiretv ►Twitter : https://twitter.com/PSDesire ►Instagram: https://www.instagram.com/photoshopdesire Softwares Used: ---------------------------- Photoshop cc 2014, 2015, 2017 Photoshop cs5, cs6, After Effects cs5 Camtasia Studio Music: ------------ Open Highway (YouTube Library) Check Out Our Playlists: -------------------------------------- Photoshop Tutorials for Beginners, Intermediate and Advanced users https://www.youtube.com/playlist?list=PLGLEKqTDn233O6PusOR1lEvRwjlErdCYV Easy, Quick and Fast Photoshop Tutorials Series (NEW) https://www.youtube.com/playlist?list=PLGLEKqTDn230TS2NzqA2BGblNYZ4NpGWT HDR Photography Using Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn232tlbcBJHNiEPj1h0wPJvVG Photo Editing, Photo Effects & Photo Manipulation - Special FX https://www.youtube.com/playlist?list=PLGLEKqTDn233VC9ZDSiLav8bI8FKJ93ny Adobe Camera Raw Filter Tutorials and Preset downloads (same settings steps for lightroom also) https://www.youtube.com/playlist?list=PLGLEKqTDn233ab_cdALEjtjGASqtTie10 Color Grading or Coloring in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233uKTZWUFq7GwgNB6BJyM7m Skin, Face & Body Retouching Techniques and Enhancing Tips https://www.youtube.com/playlist?list=PLGLEKqTDn232WN_N6Ek-vnfzr7nNKDHWT Free Photoshop Actions for Photographers and Designers https://www.youtube.com/playlist?list=PLGLEKqTDn233ZVGBJWihIuxGrav7VTCCD Text and Graphics Effects in Photoshop https://www.youtube.com/playlist?list=PLGLEKqTDn233zMfRfoFl-ZwIzzUmf9UDu
https://wn.com/How_To_Cutout_Hair_Without_Fringing_In_Photoshop_Hair_Masking_Easy_Fast
Photoshop Quick Tip: Cut Out Subject from Background in 3 Easy Steps - Refine Hair masking Tutorial

Photoshop Quick Tip: Cut Out Subject from Background in 3 Easy Steps - Refine Hair masking Tutorial

  • Order:
  • Duration: 4:37
  • Updated: 29 Sep 2017
  • views: 13622
videos
In this photoshop photo editing tutorial, learn how to use refine edge tool to cut out subject with lot of hair in just 3 easy steps. ►Download PSD file: http://photoshopdesire.com/photoshop-quick-tip-cut-subject-background-3-easy-steps/ 1 00:00:13 How to Cutout subject from background in photoshop. 2 00:00:21 Grab the Quick Selection Tool and select the model. 3 00:00:49 Now refine the selection using refine edge tool. for CC 2017 version Hold shift and click on select and mask. 4 00:00:58 And you will see the Refine Edge window. 5 00:01:05 Now we will want to have a look at our mask radius, so tick this "Show Radius" checkbox. 6 00:01:16 if you increase the "Radius" value sightly, you will see a outline appearing - that's the edge of our mask. 7 00:01:25 Rest of the mask look fine, except the hair area. 8 00:01:32 we can use the "Refine Radius Tool" to refine the hair part. 9 00:01:39 Use brush to paint around the outside of the hair part, you will see the hair starting to appear nicely. 10 00:02:04 Optional: Enable "Decontaminate Colors" option to remove background colors from the hair. 11 00:02:17 Click on "Ok". Photoshop creates a new layer automatically with refine mask. 12 00:02:32 Let bring some more hair strands. 13 00:02:39 Duplicate background copy layer. 14 00:02:46 Select layer mask and add apply layer mask command. 15 00:02:58 then go to layer - matting - remove white matte to add some hair details. 16 00:03:14 Now add inverted layer mask, hold ALT or OPT key and click on mask icon. 17 00:03:26 Take the soft brush and paint with white on hair. 18 00:03:51 Merge top both layers and save as .png. ►Check out all tutorial here : https://www.youtube.com/photoshopdesiretv/videos Cutting out a photo from background & refine edge tutorial. How to Separate an Image from Its Background. Cut out hair and difficult Images in Photoshop Tutorial. How to extract hair from a messy background in Photoshop. photoshop hair masking refine edge tutorial. Selecting Hair with Refine Edge in Photoshop. Handy Techniques for Cutting Out Hair in Photoshop. How to Remove Green Screen Background in Photoshop. Keying Out Backgrounds in Photoshop. Thanks for watching our free Tutorials! If you enjoyed our video be sure to subscribe to our channel to receive free new videos. ►SUBSCRIBE: https://goo.gl/d31fld Don't forget to COMMENT, LIKE and SHARE, to get more :) Follow US - LET'S BE FRIENDS! ------------------------------------------ ►Official Website: http://www.photoshopdesire.com ►FACEBOOK : http://www.facebook.com/photoshopdesire ►GOOGLE+ : https://plus.google.com/+photoshopdesiretv ►Twitter : https://twitter.com/PSDesire ►Instagram: https://www.instagram.com/photoshopdesire Softwares Used: ---------------------------- Photoshop cc 2014, 2015, 2017 Photoshop cs5, cs6, After Effects cs5 Camtasia Studio Music: ------------ Faith (YouTube Library) Check Out Our Playlists: -------------------------------------- Photoshop Tutorials for Beginners, Intermediate and Advanced users https://goo.gl/dBiMFM Easy, Quick and Fast Photoshop Tutorial Series (NEW) https://goo.gl/KveEjr HDR Photography Using Photoshop https://goo.gl/fds3vH Photo Editing, Photo Effects & Photo Manipulation - Special FX https://goo.gl/65p53x Adobe Camera Raw Filter Tutorials and Preset downloads (same settings steps for lightroom also) https://goo.gl/1FqX8F Color Grading or Coloring in Photoshop https://goo.gl/Xwie1P Skin, Face & Body Retouching Techniques and Enhancing Tips https://goo.gl/VbE38V Free Photoshop Actions for Photographers and Designers https://goo.gl/K2ENba Text and Graphics Effects in Photoshop https://goo.gl/gKoayP
https://wn.com/Photoshop_Quick_Tip_Cut_Out_Subject_From_Background_In_3_Easy_Steps_Refine_Hair_Masking_Tutorial
Akai MPK Mini MK2 and FL Studio 12 - PADS + Transport Setup

Akai MPK Mini MK2 and FL Studio 12 - PADS + Transport Setup

  • Order:
  • Duration: 2:19
  • Updated: 02 Feb 2016
  • views: 136297
videos
I'll show you how to setup the MPK mini Mk2, using a preset file. With this file you can use the FPC and also control the Transport with the Pads on CC mode (Play / Pause / Rec / etc) 1-Download and save the following file: http://www.mediafire.com/download/5h52k5y8a9ed7dz/mpc_oxygen25.mk2 2- Load the file in one of the MPK's programs, using the MPK Mini MK2 editor. If you don't have it, you can get it here: http://www.akaipro.com/product/mpk-mini-mkii#downloads 3- On FL Studio, Midi Settings, select the the MPK Mini MK2 and on the "Controller type" drop down menu select "M-audio Oxygen 25" 4- In the MPK select the Program with the preset file (Hold 'Prog Select' and hit the corresponding pad) Enjoy. The preset was created by me, please feel free to share or modify it. If you have any question just leave a comment. I hope its useful for you guys!!
https://wn.com/Akai_Mpk_Mini_Mk2_And_Fl_Studio_12_Pads_Transport_Setup
How To Find Ford Radio Code Serial From The Radio's Display - Sony/Visteon

How To Find Ford Radio Code Serial From The Radio's Display - Sony/Visteon

  • Order:
  • Duration: 0:28
  • Updated: 14 Jul 2016
  • views: 58420
videos
https://www.onlineradiocodes.co.uk/ford-radio-codes Online Radio CodesThe U.K's No.1 Radio Code Company, Order Online 24/7 or By Phone 01942 604333 Mon-Fri 9am - 5:30pm, With Over 25,000 Customers Served Unlock Your Radio Today. Suitable for: Ford Fiesta Ford Focus Ford Ka Ford Fusion Ford Galaxy Ford Kuga Ford Mondeo Ford C-Max Ford S-Max Ford Tourneo Ford Transit Ford Sony Visteon Ford V Codes Ford Radio Codes All models covered. v codes only £9.99 Delivered in minutes. How To find Your Ford Radio Code Serial Number: Holding Preset Buttons 1 & 6 Turn on your radio and hold the preset buttons 1 & 6 for 2 to 3 seconds, the code cycle will begin, wait until your serial shows and make note. Holding Preset Buttons 2 & 6 If buttons 1 & 6 do not work, try holding button presets 2 & 6. The radio serial will display on screen. How to Enter Your Ford Radio Code No SELECT button - Ford 3000 Traffic, 4000RDS, 5000RDS, 6000RDS, 6006E etc When the radio is turned on 'CODE' should display on the radios display. Repeatedly press button 1 until the correct first digit of the code is displayed. Repeatedly press button 2 until the correct second digit of the code is displayed. Repeatedly press button 3 until the correct third digit of the code is displayed. Repeatedly press button 4 until the correct fourth digit of the code is displayed. To Input Your Ford Radio Code, simply press button 5 or Enter and your radio will start to play. If LOCK10 appears after entering 10 incorrect codes, press and hold the number 6 button while turning on the radio to change from LOCK10 back to CODE. You then have 3 further attempts at the code before LOCK13 appears. If LOCK13 appears then you will need to take the radio to a Ford Dealer or radio specialist to be unlocked. With SELECT button - Ford 2005, 2006, 2015, etc When the radio is turned on 'CODE' should display on the radios display. If 'CODE' does not appear immediately, press 'SELECT' momentarily, then 'CODE' should appear on the radios display. Repeatedly press button 1 until the correct first digit of the code is displayed. Repeatedly press button 2 until the correct second digit of the code is displayed. Repeatedly press button 3 until the correct third digit of the code is displayed. Repeatedly press button 4 until the correct fourth digit of the code is displayed. If you have entered the code correctly on the radios display, simply press the 'SELECT' button to enter. *Free Ford Radio Code instructions are also sent after purchase
https://wn.com/How_To_Find_Ford_Radio_Code_Serial_From_The_Radio's_Display_Sony_Visteon
How to Reset, Decode or Unlock SAFE MODE for AUDI SYMPHONY 2 or II RADIO (Quick Fix Steps in Desc.)!

How to Reset, Decode or Unlock SAFE MODE for AUDI SYMPHONY 2 or II RADIO (Quick Fix Steps in Desc.)!

  • Order:
  • Duration: 0:52
  • Updated: 28 Dec 2016
  • views: 28849
videos
STEPS (ALSO IN ANNOTATIONS): 1. You need your radio manual and look for the radio card with your vin# and the four digit number underneath. 2. While the display says "SAFE" press and hold RDS and AS. 3. A roman numeral will appear on the left side of the display with a four digit number on the right (roman numerals I, II and III indicate the number of attempts, III is the LAST attempt. 4. Use the preset selection buttons to cycle through the digits. 5. After your four digit code matches what is on your radio card, press and hold RDS and AS. 6. Enjoy your freshly restored Audi Symphony II and the $80 you didn't spend at the dealer! (if your attempts are wasted, try this by another youtuber: https://www.youtube.com/watch?v=X8h9o6N68es&t=0s) If it is any consolation, this was performed on a 2002.5 Audi A4 3.0L V6 6-Speed Quattro B6 VIN# 8E
https://wn.com/How_To_Reset,_Decode_Or_Unlock_Safe_Mode_For_Audi_Symphony_2_Or_Ii_Radio_(Quick_Fix_Steps_In_Desc.)
Alexander Pedals Oblivion Vintage Delay

Alexander Pedals Oblivion Vintage Delay

  • Order:
  • Duration: 7:42
  • Updated: 14 Apr 2016
  • views: 18554
videos
http://www.alexanderpedals.com/ Welcome back to ProGuitarShop and ToneReport.com. Today we're heading into the Oblivion Vintage Delay from Alexander Pedals. Alexander has escalated from Amnesia to full-on Oblivion, radically enhancing the Amnesia's feature set for a premium analog-modeling experience. Typically, feature-rich delay pedals require a significant time investment with time spent cycling through menus and banks, but the Oblivion sounds great right out of the box at any setting. The oblivion's expression control is a breeze, while remaining extremely powerful. Any of the unit's five knobs can be controlled simultaneously with just one expression pedal, allowing for advanced delay control unlike anything on the market. The Oblivion's four modes cover the full range of classic analog delay, including Analog, Tape, Oilcan and Multihead. Five presets can be saved and recalled instantly by pressing and holding the tap button, and several hidden parameters can be accessed by holding the Select button. These controls are set-and-forget types but give players control over all facets of the pedal, including tone, modulation waveforms and output level. The Oblivion's expression jack can be reconfigured for an external tap tempo switch that helps keep pedalboard wiring tidy. A MIDI jack on the back dramatically expands the presets to 128, and lets players sync the Oblivion to a master clock.
https://wn.com/Alexander_Pedals_Oblivion_Vintage_Delay
Roland VT 3 Issue

Roland VT 3 Issue

  • Order:
  • Duration: 1:00
  • Updated: 15 Jul 2017
  • views: 135
videos
Anyone have any experience with this? Its like the Roland VT-3 'forgets' its positions/presets. Effect Wet/Dry has no effect and this happens intermittently when I move any control but this example is the Reverb control. When I turn off Reverb, preset 3 'forgets' and acts like it is Bypassed. Selecting preset 3 again takes a number of presses for it to 'catch' and hold. Baffled!
https://wn.com/Roland_Vt_3_Issue